メインコンテンツにスキップ

2023年1月に発売されたソニーのワイヤレスコントローラー「DualSense Edge(CFI-ZCP1)」。交換可能なジョイスティックモジュールなど、デュアルセンスからのアップグレードが特徴。

change joystick to tmr, but stick drifting

ive changed the joystick/analogy stick to tmr sticks in the dual sense edge, but the right one moves by itself to the left

Block Image

Attach screenshot of the calibration screen, the left one calibrated fine but some reason the right stick does this drift to the left. Id appreciate if anyone can help or guide on the issue thank you

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 2

1件のコメント:

Similar problem, installed Genfull sticks, the right stick does not work at all, and the calibration is the same picture.

Have you solved your problem? If so, how?

さんによる

コメントを追加

1 件の回答

Have you taken it apart again? In my case I could have put it in with the wrong screws or something easy like that.

このアンサーは役に立ちましたか?

スコア 0

3 件のコメント:

yes only one screw in it

さんによる

I’m having stick drift also. Tried recalibrating, then went back in and re flowed solder. No help. May remove totally the replace

さんによる

Same issue, i tried 3 gulikit sticks. The third one lasted about two hours then hard left.the 4th stick is good calibration is still good.

Going to try hallpi sticks next.

さんによる

コメントを追加

回答を追加する

matt91 さん、ありがとうございました!
統計データ:

過去 24時間: 5

過去 7 日: 45

過去 30 日: 223

今までの合計 1,077