修理を始めるには コミュニティ ストア

The 2008-2012 Ford Escape features a revised front and rear fascia and restyled LED tail lamps.

20回答 すべてを表示

オプション

trying to solve a code 302 in a 2011 escape

I’m trying to resolve an intermittent misfire in cylinder 2.

I first changed the spark plugs and found oil around the plug. I changed the valve cover gasket. No success.

Next, I checked the coil. It was OK. No success.

Next, I cleaned the mass air flow sensor and changed the air filter. I also cleaned the throttle body and put a bottle of Red Line engine cleaner on the tank. No success.

Next, I did a compression check. 3 cylinders were the range of 150 the number 2 came up around 120.

Next, I cleaned the fuel injector. No success.

Any suggestions? ThanksHow do I submit a question?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
1件のコメント

This question was migrated from https://meta.ifixit.com/Answers.

さんによる

コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

@davesharkey I assume the error code was actually a P0302. Besides all of the things you've already done, check for sticking valves or failed piston rings. Those things would also explain the lower compression. Do a leak-down test next and see what that tells you.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

1件のコメント:

Thanksoldturkey03, I’ll try these.

さんによる

コメントを追加

回答を追加する

Dave Sharkey さん、ありがとうございました！
統計データ:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 5

今までの合計 67