メインコンテンツにスキップ

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

549回答 すべてを表示

Three beeps when power connected. Tried new RAM, more info inside.

No matter what configuration I have, the computer starts up when the power is plugged in. Without hitting the power button.

With the original 1GB stick of RAM in it, it gives 3 short beeps, 3 long beeps, then 3 short beeps. A short pause, then repeats. The internal diagnostic lights have 1, 2, and 3 on solid with each case.

I've tried many different types of RAM (all 1GB modules), and here's my results:

444MHz: 3 short beeps repeating

555MHz: sometimes 3 short, sometimes 3-3-3

666MHz and 800MHz doesn't give video or beeps, but does power on

I've also pulled the CMOS battery for 20 minutes and it resulted in no change.

I've used an air compressor to dust out the RAM slots as well.

Any help would be greatly appreciated.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア -1
コメントを追加

2件の回答

ベストアンサー

https://discussions.apple.com/thread/367...

3 long tones, 3 short tones, 3 long tones Firmware restoration from CD in process. See About the Firmware Restoration CD (Intel-based Macs) for more details. Follow these directions for doing a firmware restoration: http://support.apple.com/kb/HT2213

このアンサーは役に立ちましたか?

スコア 3

1件のコメント:

I didn't mention it above, but I did try that. It just continues to beep and after a few seconds ejects the disc.

Nothing shows up on the screen at all, in any scenario.

さんによる

コメントを追加

replace the battery

that works for me and few others

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

comprenwilmington さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 7

今までの合計 931