修理を始めるには コミュニティ ストア

PlayStation 3 (PS3)はソニーコンピューターエンターテイメントによって製造された３世代目の家庭用据え置き機で、PlayStation 2の次世代機となります。これらは2006年11月11日に発売されました。

790回答 すべてを表示

オプション

One beep then three beeps Red light blinking

When my ps3 starts up after few reboots i have cfw evilnat 4.90 (or filmware lowwer) i have 1tb drive cx400

29 errors with code of: 0xA0801002 (time was set to these errors 2005/2006 soo clock was restarted prob)

Last two: 0xFFFFFFFF (or idk how many F's its hard to count when u have many of it) it had date 1970 or 1971

Do i need to do reflow or reball? Or it is deffirent thing? Because i wamna my PS3 get back alive only why i didnt update because i didnt turned it on because i didnt know when it would crash and i dont wanna it to crash when im playing like gran turismo

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

Hi!

One beep then three beeps with a blinking red light, is probably APU issues...

You need to reflow or reball it.

Reflow and reballing are actual 2 different things.

Reflow: Melting the solder under the APU and let is harden again. This will solve solder cracks/colt joints. Most of the time it's a temporary fix... Not sure for how long, that depends.

Reball: Removing the APU and do all the solder work over again with good quality solder. As well for the APU as for the motherboard. Then put the APU (good positioned offcourse) back on the motherboard. This should be the fix you want. But it's way more difficult.

At this moment those 2 options are your only options to fix the APU at the moment.

Good luck with the repair and let us know how it goes!

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

2 件のコメント:

i heard someone could reflow ps3 with oven idk if thats true do u maybe know? because reflow is close to cost of ps3 and reball is over cost of ps3 (used)

because i dont have any heat guns or anitin really or do u not recomend it?

vid: https://www.youtube.com/watch?v=D0JEZhsS...

i heard its temp fix but not sure

さんによる

Hi!

With the oven you will probably overheat other components as wel... So please do not use the oven. You can buy a heat gun on iFixit here: Heat Gun

You do need it to reflow it and thus you need the heatgun... Reballing is very difficult and thus you need more expensive tools. You could better to bring it to a shop if you do not have the equipment for reballing, unfortunately this repair is more expensive as well yes :(...

Hopefully you will get the PS3 fixed again!

さんによる

コメントを追加

回答を追加する

TST NOOB さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 19

今までの合計 19