My Whirlpool Cabrio top load washer is giving multiple error codes. The first was LF. I changed the water inlet valve and it fixed it for 2 days. Then it started showing F8E1 and F0E3. After replacing the water inlet valve, it was going thru a cycle and started making an electrical “buzzing” like something was straining or stuck. Then started flashing F8E3. Any suggestions? Does this sound like a control board problem?
評価: 460.1千
11
373
1.5千
Hi @chadmeuir
Here's the tech sheet for the washer that may help.
Go to p.10 to view what to check when an F8 E1 and F8 E3 error occurs.
If there's a faulty part that needs replacing, here's the part list that is useful.
When you have located the wanted part in the list, you'll find that the manufacturer's part number is listed with it. Search online for the part number only, to find suppliers that suit you best.
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 5
過去 30 日: 15
今までの合計 15
