評価: 13
1
I had swapped the joysticks for Hall effect joysticks. I had taken everything apart and put everything together carefully. After putting it all back together my switch lite turns off randomly when I do slight twists or taps on the shell. The screen will also cut out randomly.
評価: 16千
20
12
20
Hi Logan!
Most of the time caused by cables which are not fully in OR due damaged components/traces on the motherboard! Can you double check to see if you can see any damage on the motherboard or missing components? Also re-check if all the cables are connected properly.
If you are not sure, please feel free to share some pictures with us (or video(s)).
Thanks in advance!
このアンサーは役に立ちましたか？
I had this issue with my switch light also. I made a guess that some ribbon cable that was attaching the monitor to the motherboard might be the issue. I ended up unplugging each ribbon cable and plugging them back in to make sure they are in tight. Works perfectly now.
I think with use the ribbon cables can wiggle free and cause a spotty and inconsistent connections causing the display to flicker or even shutoff.
過去 24時間: 1
過去 7 日: 9
過去 30 日: 28
今までの合計 82
