修理を始めるには コミュニティ ストア

A range of older (and newer) premium coffee makers from Jura.

4回答 すべてを表示

オプション

Water in and on drip tray

I am trying to repair a (1st gen) Jura Z5 Impressa coffee machine and I hope anyone can help. I've found the online repair guides which have been very helpful but I'm unable to find a fix for my problem. So far I've taken apart the brew group and replaced the rings; I replaced the entire drainage valve. I've also cleaned and partially replaced the outlet valves and decalcified and cleaned the machine using tablets. The machine works and the coffee is fine but I feel that there's a lot of (brown) water in and on the drip tray. Also, I noticed that during decalcifying, no water came out of the outlet but it did make a sound. Does anyone have any suggestions?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順

オプション

The Z- Impressas are rather sophisticated... Brown water = coffee?! Hmmm. Try using the device without sidepanels (Caution!) or the frontpanel of the drip tray and look, if you can see where it comes from. My first idea is that you should also check the solenoid for the drain valve, if its piston moves freely. This guide helps. My second idea is the ceramic valve.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

1件のコメント:

Thanks, I really appreciate it. Now I know what else I can try.

さんによる

コメントを追加

回答を追加する

JuraZ5 さん、ありがとうございました！
統計データ:

過去 24時間: 2

過去 7 日: 6

過去 30 日: 13

今までの合計 35