修理を始めるには コミュニティ ストア

2017年7月28日に発売されたNintendo 2DSの継続モデルのハンドヘルドゲームコンソールです。

203回答 すべてを表示

オプション

Right speaker connector torn off the motherboard

Hi, I recently had to open my New 2DS XL to replace my Dpad, as the previous one had a serious drifting issue. The problem is that I accidentally torn the right speaker connector off of the motherboard and I thought just putting it back in place would work, but that wasn't the case. Now the right speaker isn't working and I was wondering if it's because I have to solder it back in place. I have attached a picture that I got from the repair wiki where I've circled the connector I'm talking about for clarity.

Thanks in advanced.

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順

オプション

It does appear you have to re-solder the connector on, and potentially you may have to buy a new connector.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

オプション

G'day,

If you've torn the speaker connector off, chances are you've also torn the pads with it. My advice would be to see what you can use with the old connector, but you'll need to run some wires in order to have it function. Also, you'll need to run some wires from the traces on the board to the connector by scraping some of the coating off to expose the copper.

hope this helps :)

-NP

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

1件のコメント:

So what you're saying is that not only would I have to solder the connector back to the motherboard after scraping it, but also solder in additional wire inside the connector to restore the electrical current from the connector to the speaker cable?

I didn't understand very well.

Also yeah, I ripped off the pins alongside the pads you were talking about unfortunately.

さんによる

コメントを追加

回答を追加する

RokuMH さん、ありがとうございました！
統計データ:

過去 24時間: 2

過去 7 日: 5

過去 30 日: 18

今までの合計 93