メインコンテンツにスキップ

The Husqvarna YTH20K46 is a 24-horsepower lawn tractor or riding lawnmower with a cutting width of 46 inches.

11回答 すべてを表示

Mower won’t start, no click or spark. Maybe a safety/kill switch?

So, I started the mower up just fine and drove about 5 feet and it shutoff. I tried to start it again, and nothing. No noise or crank at all. So I bypassed the ignition with a flathead and it sounds good but just won’t get any spark. I took the fuel line off and fuel is coming out when attempting to start. However, the spark plugs have absolutely no spark at all. So I replaced them and nothing change.

To sum it up, turning the key does nothing. But I can bypass it with a flathead and it just cranks but gets no spark. Fuel system seems good, so I’m curious if there’s a safety/kill switch somewhere.

It has a new tank of gas, new spark plugs, fuel is spitting out, oil is new, filter isn’t clogged.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

@jaredjones1556 here is the schematic for the mower you listed

Block Image

First thing to check would be the seat kill switch and after that the wiring to the junction box and the ignition switch. To start, the ignition switch connects B + S + A1 so your clutch safety switch is right in the midst of it as well. Oh yes, check all of your fuses too.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Jared Jones さん、ありがとうございました!
統計データ:

過去 24時間: 18

過去 7 日: 134

過去 30 日: 566

今までの合計 1,546