評価: 1
1
I tried replacing my HDD with a SSD but it shows the lenovo logo and nothing happens. I waited for 10 minute and tried presing f2, f8 and f12, but had no efect. Should I change something în my BIOS setting? I run the latest BIOS version for this model
I found this video online: https://youtu.be/kFbJoa9y52s
このアンサーは役に立ちましたか？
I know how to replace my HDD, but I wanted to know if there are some necesary BIOS setting
評価: 451.2千
11
367
1.4千
Hi @iulianmaties,
Did you "clone" the new SSD from the old HDD before replacing the HDD i.e. exact replica of the HDD.
Most SSD come with cloning software to make it a seamless uppgrade i.e. clone SSD using software, remove HDD and replace with SSD and turn on the laptop.
It will be like before except faster as you now have an SSD
Is there an OS installed on the SSD?
If there's no Operating System on the SSD the laptop won't boot.
You shouldn't have to change any settings in the BIOS for it to boot if you cloned it.
If you didn't clone it then if you're doing a fresh install you need to boot from an install USB disc and follow the setup procedure.
You need a bootable setup USB disk to do this.
このアンサーは役に立ちましたか？
I will try to find a software ti clone my HDD. I only need the C drive, so it just be a bit more complicated, since I am going to use my HDD externa srorage via usb. So thank, I will just try this
過去 24時間: 0
過去 7 日: 4
過去 30 日: 10
今までの合計 54
