How do I reconnect ribbon 3 and 7 to their connectors?

Question

iPhone 3GS

より早い処理スピードを可能にしたiPhone 3Gのアップグレード版です。このデバイスの修理は3Gと似ており、標準のドライバーと開口ツールが必要です。モデル番号 A1303 / 16 もしくは 32 GBの容量 / ブラックもしくはプラスチックの背面ケース

1500回答すべてを表示

Andrew @andrew52777

評価: 23

2

3

投稿日: 2012年1月24日

オプション

How do I reconnect ribbon 3 and 7 to their connectors?

I have recently begun repair of an iPhone 3GS. I have put everything back together except connector 3 & 7. I have tried for long lengths of time attempting to reconnect both of these, but no matter how hard I try, they will not connect. I finally got 3 in, but as soon as I close the lid down on the connector, it pulls right out. Seven wont even try to clamp in. Does anyone have any help? Also, can anyone recommend some tools to allow me to do this a lot easier?

この質問に回答する同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 1

コメントを追加

3件の回答

Phillip Takahashi @philliptak35704 評価: 86.7千 143 88 149 · Answer 1 · 2012-01-24T15:03:59-07:00

最も参考になった回答

Phillip Takahashi @philliptak35704

評価: 86.7千

143

88

149

投稿日: 2012年1月24日

オプション

The connector 3 socket has a black section which is actually the latch for it. Once you insert the ribbon cable press that black piece down (it should be up when you insert the cable) and be sure that it is all the way down. Cable 7 is just a press fit. If you are having troubles, a little electrical or kapton tape may provide the necessary force to keep things down when re-assembling.

このアンサーは役に立ちましたか？

はいいいえ

スコア 3

コメントを追加

Ijust Like @ijustlike 評価: 1 · Answer 2 · 2012-01-24T16:02:16-07:00

Ijust Like @ijustlike

評価: 1

投稿日: 2012年1月24日

オプション

1st make sure you have the correct part... although they look identical, the iPhone 3 and 3GS LCD are different, and they will not fit. If you are certain you have the correct part, the trick I use for the #7 (LCD) connecter is to Listen for 2 clicks when you snap it in. the #3 doesn't go in all the way, you can see if you look closely that the tip of the ribbon cable usually has either a line or is shaded different colour either lighter or darker gold... don't go beyond that. then make sure it's lined up and the latch snaps back into place

I just replaced one and took some pix for you... 1st pix shows clip is flipped open

2. insterted... noticed it's not in all the way.. just only until where the shading change

3 last pix is clip flipped down...

You can use anything to flip it down, I just usually use my finger, but a plastic butter knife is good

http://img684.imageshack.us/img684/8997/...

http://imageshack.us/photo/my-images/35/...

http://imageshack.us/photo/my-images/196...

このアンサーは役に立ちましたか？

はいいいえ

スコア 0

2 件のコメント:

It is a 3gs screen. I noticed the shade, but I put it in, and close the clamp, and it comes right back out. Do I have to push it in at all? If so, what tool should I use?

Andrew さんによる2012年1月24日

Thanks man! That's awesome! I was putting in at the other end! I greatly appreciate this!

Andrew さんによる2012年2月6日

コメントを追加