評価: 35
3
Hi everyone!
I'm looking for the kind of double-sided tape on the gold part on the back of the Lightning connector. I think that golden part needs to somehow stay in contact with the housing.
Does anyone know what type of tape is used?
Thanks in advance.
評価: 599
9
9
13
Once fitted the loud speaker will hold it down so I wouldn’t worry about it.
このアンサーは役に立ちましたか？
Thanks for the answer. But unfortunately, part of the tape doesn't stick anymore and the iPhone stopped working the speaker and doesn't charge anymore.
I bought another piece.
評価: 59千
124
44
91
Hi sidneijunior,
I was in the same position with an iPhone X I was working on; I felt like there was probably a reason for the conductive adhesive used on the lighting connector flex, so I went looking for a replacement as well.
I didn't really find any sort of double-sided tape like you're describing, so I ended up with a liquid conductive adhesive that came in syringes. I just squeezed out a little bit and spread it over the area of the flex that was originally glued. Seemed to work; so far so good!
このアンサーは役に立ちましたか？
Thank you for the answer!
I bought another piece, but I solved part of the problem using aluminum foil, the speaker doesn't work, but the iPhone back to charge again.
It’s not the adhesive it’s either your speaker or you need a new charge port assembly. I have removed loads of ports and transplanted them into other phones with no issues.
@sidneijunior, when you say you bought another piece, what exactly are you referring to? I'm with Nigel in believing you probably need a new lightning port assembly since that's the common point between charging and the speaker.
How exactly did you fix the charging problem with aluminum foil? I'm curious...
@dadibrokeit I bought the whole set that I sent in the photo, in the parts that have the stickers, I made some folds with the aluminum foil with the exact size, so the iPhone started charging again.
過去 24時間: 0
過去 7 日: 0
過去 30 日: 3
今までの合計 68
