メインコンテンツにスキップ
リペアコミュニティに参加 - アカウントの作成

モデル番号A1136/30、60、80GBハードドライブ/ブラックまたは白のプラスチックフロント

USB Power Port Clip Broken

I went to plug in my 30GB iPod classic and it came loose. I took it out and out came the little plug that connects to the usb cable. After taking it apart I found out that the pins have been bent in various directions. What do i need to do to repair or should i just give up and get a new one.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア -1
コメントを追加

1 件の回答

ベストアンサー

Gabriel Petersen, if I understand you correctly, the part on the bottom of your iPofd come loose? That is your dock connector and it is a part of the logic board. It is soldered on to it. If you are good at soldering very small, tedious components, you can purchase a replacement from here. If you are not comfortable doing that kind of work, I would suggest that you purchase a replacement logic board from places like this. and the guide for your repair is here. Hope this helps, good luck.

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

回答を追加する

Gabriel Petersen さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 4

今までの合計 422