メインコンテンツにスキップ

”PS2”として知られた第6台目のビデオコンソールは、Sonyによって2000年3月に日本国内で発売されました。米国では2000年後半に発売されました。モデル番号はSCPH-30000です。このデバイスの修理には一般的なツールが必要ですが、修理は技術が必要です。

198回答 すべてを表示

Video output distorted and broken fan pins

my PS2 fat series is SCPH-39006. The video output is distorted although audio output is fine. Im planning to fix it myself as i do have quite a handful of soldering experience and i know the basics of hardware stuff and i do have all the equipments to do so. so i thought this would be a good experience. But once i open it i realized i have no idea what im doing and in the process of opening it and trying to get the fan off it appears to broke off. My question is

  1. Where do i start looking or begin with trying to fix the video issues?
  2. Can i just solder back the fan? It will be a pain to remove later but if it works then it works. But if someone have another idea that would be great
  3. Here are pictures of the motherboard

#

Block Image

#

#

Block Image

Picture of broken fan pin thingy (my english isnt great)

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

@raygamerx that is what I would try for as longs as the traces are still good and nothing else ripped off. As for your Video, looks like this board has gone through some heavy mods. That will make it more difficult to troubleshoot and fix. You do want to check all of those soldered wires and check the connections. Make sure none of them is either disconnected, corroded or causes a short anywhere.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Ray さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 12

今までの合計 141