修理を始めるには コミュニティ ストア

Repair guides and support for top and front loading Whirlpool brand washers.

426回答 すべてを表示

オプション

Why is my Whirlpool washer running extremely hot?

Re Whirlpool model WFW8640BW0.

On all programs and all settings the washer appears to be heating the water to an extremely high temperature. I.e. the water appears to be hotter than the temperature of water from our water heater. ..... It is possible that it is only filling with hot water, but given that even after an hour or more the water is extremely hot, there must have been some heating by the washer because [1] water from our water heater would have cooled down, and [2] new water drawn in would be cool as the water heater is a long way from the washing machine.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

Hi @pulaski

There is a water heater element and a temperature sensor - Whirlpool part # WPW10467289 (supplier example only) in the washer. The sensor may be faulty.

Here's the tech sheet that may help. Run the diagnostics as described in the sheet and check if there's an F3 E2 error code (Temperature system error).

Test #10 on p.19 describes how to test the temperature sensor.

If the sensor is faulty search online for the part number (see above) to find suppliers that suit you best. The supplier link above has a video that shows how to replace it which may also help.

If the sensor tests OK then follow the steps in Test #10 to further isolate where the problem is

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

2 件のコメント:

I already replaced the sensor. It made no difference.

さんによる

@pulaski,

What error code, if any is shown when you run the diagnostics as shown in the tech sheet?

Did you do the follow up tests in Test #10 in the tech sheet as I suggested in case the sensor was OK, you didn't say?

さんによる

コメントを追加

回答を追加する

Pulaski さん、ありがとうございました！
統計データ:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 17

今までの合計 283