メインコンテンツにスキップ

2017年9月に発売されました。モデル番号はA1863、A1905。GSM もしくはCDMA/容量は64か256GB/ゴールド、シルバーとスペースグレイ

874回答 すべてを表示

Touch stops working sometimes after screen replacement

My iPhone 8 touch might stop working (home button works, the screen is on but not interactable) after I replace a screen myself (aftermarket screen). Reattaching the LCD cables can temporarily solve the issue for a week, but in worst case scenario, only for an hour. Touch simply stops working while normal used, as I never drop my phone after repairing.

Did I do anything wrong when reattaching the LCD cables? Or is it the screen's problem?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

1 件の回答

最も参考になった回答

Hi

This sort of behaviour can happen after a had aftermarket screen has been installed

To confirm this I would reattach the old screen and see if the behaviour continues

If the behaviour continues I would start to have a look at the LCD and touchscreen connectors and clean them with some isopropyl alcohol

After that it is a board level issue so if you haven’t done this sort of work before I recommend taking it to a authorised repair shop that specialises is that sort of repair

Hopefully this helps

Any questions please ask

Thanks:-)

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

Lewis さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 6

今までの合計 53