食器洗浄機の修理と解体ガイド

253の回答 すべて表示

Miele Dishwasher Error F85 on display

My Miele Dishwasher G2220 SCI just popped up this error on the display. Suspect it's a temp error but haven't yet located any details on it.

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 1

コメント:

Thanks - I may have misread the code as E instead of F. A power reset has cleared the fault for now and I'm running a test cycle to see if it happens again. I'll know where to start if it does.

による

May your dishes come clean....best of luck :-)

による

コメントを追加

Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

当社のショップを閲覧する

1回答

選択されたソリューション

Richdave, I cant seem to find E codes for the Miele. It seems like they are using F codes. F85 would be Slide shutter signal change fault. "The slide shutter, which is part of the circulation pump, alternates water supply to the spray arms. The slide shutter moves back and forth to open or close water paths to the different spray arms. For 30 sec. both the top and bottom spray arms are supplied and during the next 30 sec. the middle spray arm only. A sensor monitors the movement of the slide shutter. If no movement is detected, the dishwasher faults out with an F85." The slide shutter is part of the circulation pump assembly. Disconnect pump and check for blockage at pump hose. If that does not help replace the circulation pump. The codes are listed right here

この回答は役に立ちましたか?

スコア 4
コメントを追加

回答を追加する

Richdave さん、ありがとうございました!
統計データを表示:

過去 24時間: 5

過去 7 日: 21

過去 30 日: 102

今までの合計 11,205