修理を始めるには コミュニティ ストア

2018年9月21日発売。モデル番号A1921, A2103, A2104、GSM もしくはCDMA / eSIM もしくはナノSIM /64, 256,もしくは512 GB/ シルバー、ゴールド、スペースグレイ(正しい発音は"iPhone 10 S Max")

376回答 すべてを表示

オプション

Why does my screen go black randomly?

I recently replaced my broken screen on my iPhone XS Max with an IFixIt LCD screen. Since my phone screen was completely unresponsive to touch before replacing it, i wasn’t able to shut my phone down before repairing the screen. I just unplugged the battery connector and went on with the procedure. Now, randomly, my phone screen will go black while i’m using it but the phone is still on. All it takes to fix it temporarily is to turn the phone off and on. Now, is it because I unplugged the battery connector during the repair without shutting the phone down or is it a faulty screen? Please Help!!!!!

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

Unplugging the battery connector would not have caused any damage. In your description you say it is an LCD screen and these can be problematic and you should have purchased an OLED screen. If it is an OLED screen I would back the phone up and do an update or restore and see if the problem persists, if it does you will need to return the screen for a replacement. Before you do though I would make sure the top flex connector on the screen is seated properly and if the screen is losing image or backlight, you can do this by shinning a torch on the screen and see if you can make out an image.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

3 件のコメント:

Hi @imicrosoldering

I thought OLED screens didn't have a backlight as the light comes from the pixels themselves, but I'm always willing to be corrected if I'm wrong ;-)

Cheers

さんによる

@jayeff You are right Jeff. I was thinking if the ambient light sensor was playing up you should be able to see an image with a torch shined onto the screen.

さんによる

@imicrosoldering

Learning all the time ;-)

Cheers

さんによる

コメントを追加

オプション

WAIT...unplugged the battery connector during the repair without shutting the phone down?!?!?!?

congrats< now you need to replace the battery because you messed up there.

and also did you transfer the data of the original iPhone screen? that could be a problem 2

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

1件のコメント:

didn’t have to be crabby abt it lol. I explained why i couldn’t power the phone down. i think i might contact ifixit for a different screen before i replace the battery

さんによる

コメントを追加

回答を追加する

Nicholas Albensi さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 7

今までの合計 192