(Screen replacemened) Phone restarts when shaken too hard or pressed

Question

iPhone XS

2018年9月21日に発売されました。モデル番号A2097, A2098、GSM もしくはCDMA / eSIM もしくはナノSIM / 64, 256、512 GB / シルバー、ゴールド、スペースグレイ。(正しい発音は"iPhone 10 S.")

398回答すべてを表示

Max Meider @maxmeider

評価: 1

投稿日: 2022年2月10日

オプション

(Screen replacemened) Phone restarts when shaken too hard or pressed

As stated in the title, when I replaced the screen, altough i did bend two things (shown in image below):

I rebend them, put everything together and it seemed fine at first, but as soon as I started to “smudge” the screen to see if it fit and wasnt lose, the screen went black. The apple logo appears and im back at the home screen.

Then I tried shaking it around to see if I could replicate the problem, and sure enough after some shaking it rebooted again.
This seems to be some sort of a short circuit.

I tried force restart, rebending the pins again and making sure everything was correctly plugged in.
Nothing changed.

What do I do now?

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

1 件の回答

ベストアンサー

Alisha C @flannelist

評価: 32.8千

24

35

32

投稿日: 2022年2月10日

オプション

Those little clips just serve to snap the display into the rest of the housing. Being bent shouldn’t be a *huge* deal. I have inadvertently done this before to no effect more than once. I would be more concerned about the cables. I would inspect the actual flex cables coming off the screen. Check and see if they are getting pinched or were damaged in any way when you closed everything up. Particularly in the spot where the cable curls around.

Also, what sort of display are you using? Is it an LCD? or an OLED?

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

3 件のコメント:

I will take a look right now.

It is an LCD display.

Max Meider さんによる2022年2月11日

My Problem seems to be is that, if taken apart, the screen will come on and function normally, even if I press hard or try to replicate the problem. the problem really only appears if i close it back up. Perhaps the flex cables you mentioned of, could be getting squished. Is that possible?

Max Meider さんによる2022年2月11日

@Max Meider LCDs aren't my favorite. For a couple of reasons, but I understand the allure of the price differential.

If that's the case, i would pay attention to where the cables attach to the screen, in the lower left corner (if you're looking at the back of the display). See if you squish the cables in that area if you can recreate the problem.

Alisha C さんによる2022年2月11日

コメントを追加

My Problem seems to be is that, if taken apart, the screen will come on and function normally, even if I press hard or try to replicate the problem. the problem really only appears if i close it back up. Perhaps the flex cables you mentioned of, could be getting squished. Is that possible? — Max Meider
@Max Meider LCDs aren't my favorite. For a couple of reasons, but I understand the allure of the price differential.

If that's the case, i would pay attention to where the cables attach to the screen, in the lower left corner (if you're looking at the back of the display). See if you squish the cables in that area if you can recreate the problem. — Alisha C

iPhone XS

(Screen replacemened) Phone restarts when shaken too hard or pressed

1 件の回答

回答を追加する