評価: 1
1
I replaced LCD and broken glass, in the process I might damaged connector 3 and maybe other parts of the board.
When I close the IPhone, the screen display ok, the battery is charging, but the touch screen is working only on the left half side - I cannot scroll right to the end to unlock the phone.
What can be wrong? Should I need to replace the whole board?
この質問は役に立ちましたか？
評価: 784.3千
1.1千
894
2.3千
Always double check your connection and make sure they are seated right and that you did not end up bending a pin or similar. Of course also make sure you have the right part and did not get the 3G part. If any and all of this works out okay, I would think that it is your digitizer. Usually, if it is something on the logic board, you have an overall non-functioning digitizer. If part of the digitizer is not responding, it is the digitizer that needs to be replaced. Hope this helps, good luck.
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 0
過去 30 日: 2
今までの合計 914
