メインコンテンツにスキップ

ゲームボーイ、ゲームボーイアドバンスと他の任天堂携帯型ゲーム機で仕様されている読み込み専用メモリカートリッジの修理ガイドです。

10回答 すべてを表示

Is this cartridge even worth fixing?

Recently my copy of Super Mario Land for the Gameboy stopped working. I opened it up, tested around with a multimeter, and the problem was obvious enough.

Block Image

I don’t know how I’d go about fixing this without damaging the board as I’m fairly inexperienced, and its an inexpensive game, so maybe its not even worth trying?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

1 件の回答

ベストアンサー

@o0mcnugget0o that is a tough one to answer. The repair is actually straight forward. Use a scalpel and remove some of the green mask from the copper traces at the end and the beginning of where the “fracture” is. Then solder a thin jumper wire across to reconnect the trace. The trouble for you might be the soldering. Maybe you have somebody that could do that for you. I would at least try. Remember it is an “inexpensive” game but still something that would end up in the landfill and thus create more waste, which we really don’t need. Best of luck and let us know how it works out.

このアンサーは役に立ちましたか?

スコア 1

2 件のコメント:

Thanks! I tried out holding the copper wire in with electrical tape, (temporarily, for testing), and it worked! Ill go back through later and solder it on!

さんによる

......and that's how it's done! Awesome. Glad you figured it out and got it working.

さんによる

コメントを追加

回答を追加する

DJ Gunter さん、ありがとうございました!
統計データ:

過去 24時間: 1

過去 7 日: 8

過去 30 日: 24

今までの合計 587