メインコンテンツにスキップ

より早い処理スピードを可能にしたiPhone 3Gのアップグレード版です。このデバイスの修理は3Gと似ており、標準のドライバーと開口ツールが必要です。モデル番号 A1303 / 16 もしくは 32 GBの容量 / ブラックもしくはプラスチックの背面ケース

1500回答 すべてを表示

Charging problem after replace rear panel and dock connector

Hi:

I just change the rear panel, and the dock conector

from my iPhone 3GS model A1241.

Everything is working fine,

- on/off/home button

- /volume button/mute button

But when it's connect the iphone to the computer (Imac) or

wall adapter, never fill out the battery. The itunes

don't recognize iphone, so i can't do back back up data.

Before the replacement, the battery was working good

What can be wrong ?

Thanks

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア -1
コメントを追加

3件の回答

ベストアンサー

First I would check to make sure the dock assembly is connected properly and is sitting right on the logic board. Also check if it is getting an antenna signal and home button working.

If those check out you may want to look for pins missing in the dock or other debris causing an obstruction.

The cord you are using could be defective (if using the same cord).

I don't think it would be the battery in this case because iTunes isn't recognizing either.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

Hello thanks for your info.

Yes i already check all this things (Home button - dock connector+logic board), and i have three cords and don't work with no one

Today i see more strange behavior with the battery,

the iphone bar shows like 40 % or 50% off the charge

so ... i put all day the iphone in ipod mode (playing forever)

and the iphone stay on play like 4 hours.

So i think the battery is working good but the iphone for some reason

don't reflect the really state off the batery

i don't know what part can have issues

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

I used to have the same problem I did was restore the iphone (3g) but now I can not finish the restoration because my Macbook does not recognize

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Lejo さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 973