HELP! should I remove the battery?

Question

iPod Touch 第4世代

モデル番号 A1367/ 8, 16, 32 もしくは64 GB容量

915回答すべてを表示

The Mobile Menders @themobilem68401

評価: 75

6

3

投稿日: 2011年11月6日

オプション

HELP! should I remove the battery?

I was repairing my friends I pod touch 4th gen screen/LCD. When i was removing the shield (being careful!) I cracked the volume/power button flex cable!

Now I have to replace the flex cable

but I'm not sure if I should disconnect the battery first?

I fear that I may do even more harm by soldering the new flex cable to the board with the battery still attached

The battery (of course) is soldered to the main board

. A quick look around the internet didn't reveal any information. New flex cable will arrive in a few days. I could use some help real fast.

Thanks

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア -1

コメントを追加

2件の回答

ベストアンサー

Garry @garry25418

評価: 961

iDoctor, LLC.

8

1

投稿日: 2011年11月6日

オプション

I agree that removing the battery would eliminate any chance of short circuit... But I have soldered in over a dozen volume flex cables on the touch 4 and never removed the battery. I would recommend turning power off though. The risk of a pad lifting is more likely when removing the battery than a short. You just need to weigh your options.

The solder contacts are covered with a glue that needs to be removed prior to removal. Careful not to bump the resistors, etc when working on the board. Also, if in a cold climate remember to wear a wrist strap to avoid a static induced short

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

3 件のコメント:

Thank you Garry. Should I use a little acetone to remove that glue?

The Mobile Menders さんによる2011年11月7日

Garry you should write a guide!

The Mobile Menders さんによる2011年11月7日

I'm not sure about acetone. I just gently scrape it off.

Garry さんによる2011年11月9日

コメントを追加