修理を始めるには コミュニティ ストア

2016年9月16日に発売。モデル番号は1778,1784。 GSM かCDMAの32、128、256GBがあり、色はローズゴールド、ゴールド、シルバー、ブラック、ジェットブラックがあり。

1364回答 すべてを表示

オプション

Repaired phone, now nobody can hear in call and no speakerphone option

This Iphone 7 plus was “repaired” at a local shop, the battery and screen were replaced but ever since everytime she tries to use the phone she cannot hear anyone, they cannot hear her and speakerphone option is grayed out. I replaced the speaker after finding the other one was damaged but still no change. I also discovered several missing screws and a knick across one of the ribbons, From the looks of it it wouldnt be surprising to find the front facing camera ribbon has gotten damaged but this seems like a different issue to me.

Block Image

the 1 pic is just showing the missing screws, this was the 1st thing i noticed when I opened the phone.

Block Image

2nd pic is showing what Id guess is a screwdriver knick from slipping off one of the screws

Block Image

and the last pic is just showing the damaged speaker I replaced.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

It seems like related to Audio IC issue which is a very common problem with iPhone 7 and 7P. Some broken connection under the Audio IC is responsible for this issue. Audio IC has a pad c12 which is connected to a near by resistor R1103, you need to repair that broken path by putting a jumper wire between C12 & R1103. This is the right solution for this problem. Some time in rare case may need to repair J12 and H12 pads also.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

1件のコメント:

And if you aren't capable of microsoldering yourself, you'll need to take it to another repair shop that can as that is the only way to resolve this issue.

さんによる

コメントを追加

回答を追加する

JessNaah89 さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 22