修理を始めるには コミュニティ ストア

Released May 2015, identified by model number SM-T350. Features 8.0″ TFT capacitive touchscreen, 5 MP camera, Wi-Fi, GPS, Bluetooth.

118回答 すべてを表示

オプション

SM T290. Screen replaced and after an update touch stopped working.

I replaced the screen of a Samsung Tab A 8.0 T290. Touch was working fine. Client said there was an update and updated it. The touch stopped working. I ordered a new screen thinking the one I installed was defective. Same issue, the touch was not working . Client claims he contacted Samsung and Samsung would have said the firmware recognized it was not an original screen and locked the touch.

anyone heard about this? Is this something new that Samsung does? I replaced it on another tablet same model and no issues whatsoever.

please advise.

thanks

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 2
1件のコメント

I have the exact same issue as written. After I had installed the new screen and was assembling the tablet I accidentally powered the unit on and in that short period the touch worked fine. I had shut the tablet back down to finish reassembly and on rebooting for the first official time I have had no touch control. I’m lost.

さんによる

コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

I did a rollback of the Firmware and it fixed the issue

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

1件のコメント:

I'm having the same problem ... which version did you get back to?

さんによる

コメントを追加

オプション

I have this same issue on one of my kids’ tablets that has a replaced screen. Rolling back the firmware to the previous version fixed it. Looking over the system logs from before and after the firmware update and seeing which devices are recognized, I suspect they left a driver out of the firmware either on purpose or by mistake. Somehow I doubt Samsung would do this on purpose as I wouldn’t expect replacing screens on one particular model of tablet to be a big source of revenue for them but you never know.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

2 件のコメント:

How you downgrade firmware??

さんによる

would it be possible to tell which version you used to get the firmware back? if you have any tutorial you used it would be great ... i need to do this downgrade too

さんによる

コメントを追加

回答を追加する

Carl Letourneau さん、ありがとうございました！
統計データ:

過去 24時間: 2

過去 7 日: 4

過去 30 日: 10

今までの合計 1,609