メインコンテンツにスキップ

Sony Computer Entertainmentによって製造されたTV用ゲームコンソールです。PlayStation 4 Slim (CUH-2000シリーズ)はSP4の薄型モデルです。2016年9月7日に発売されました。

569回答 すべてを表示

Why I am getting every time that error: SU-41350-3

Hello, previously it had the other error code (SU-42118-6) when I bought it from seller, when I get the item and plugged in it throwing that message: Can not find the update file (SU-41350-3). I tried different usb drives 8 and 16gb size. downloaded reinstallation file and tried to reinstall, but after pressing ok (x button) it shows that error. is there any good solution? HDD has 100% health

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
3 件のコメント

I replaced HDD , both hdd has 100% of health. but still getting the same error

さんによる

I Think Tronicsfix should be good at this point. He would have experience

さんによる

Create a usb with exfat or fat32 partition. Create a folder structure PS4\UPDATE and place your PSUPDATE.pup inside it. Then Ps4 will recognize it.

さんによる

コメントを追加

1 件の回答

ベストアンサー

Hi!

How is the USB formatted? Should be FAT32.

Also make sure you use the “Reinstallation file” and not the “update file”.

You should need this one: http://dus01.ps4.update.playstation.net/...

Guide: https://www.playstation.com/en-us/suppor...

Note: If nothing is working, just swap it with a known working hard drive. If that also fails, my guess is that something went wrong in the firmware…

このアンサーは役に立ちましたか?

スコア 2

5 件のコメント:

I did the same way several times, reinstallation file written on the fat 32 formatted usb drive. correct folder name. I replaced hdd with another one, but same problem . maybe the previous error code is in action?

さんによる

If that is the case, please read the following article: https://windowsreport.com/ps4-errors-su-....

They are telling "This error comes from a broken ribbon connector between your motherboard and BD-ROM". Perhaps replacing the ribbon cable can work, or the drive needs to be replaced. Worst case: Something is wrong with the drive's PCB or motherboard related.

さんによる

I have working one and will try . thanks

さんによる

No good news. I replaced the BR drive. also checked all ribbon cables connection between two side, they all beeped with multitester

さんによる

Perhaps it is firmware or motherboard related.. Motherboard looks good too?

さんによる

コメントを追加

回答を追加する

Giorgi Mamardashvili さん、ありがとうございました!
統計データ:

過去 24時間: 1

過去 7 日: 10

過去 30 日: 45

今までの合計 1,717