メインコンテンツにスキップ

2015年9月25日に発売。モデルA1687/A1634。このデバイスの修理は前モデルと似ています。スクリュードライバーとこじ開けるツールが必要です。GSM もしくは CDMA。容量は16、64か128 GB。カラーはシルバー、ゴールド、スペースグレイ、ローズゴールド。

985回答 すべてを表示

iPhone LCD Backplate is stuck preventing access to the insides

Hello all. Today the adhesive holding the screen of my phone to the finally gave up and now my screen is pretty much loose on all sides:

Block Image

Block Image

I’ve had my screen replaced two times (yes I know I’m clumsy) by a third party repair shop so this screen is not an original Apple one.

All I need to do is a simple screen replacement, and a new battery whilst I’m at it as mine is on its final legs, however when I propped up the loose screen to have a look at the internals, I noticed the LCD backplate is blocking the view of the internals.

Block Image

This confused me as in videos there isn’t the LCD Backplate blocking the way and lifting the screen reveals the insides like the battery.

I checked if I could just simply lift it up and move it out the way but it seems like its attatched at these points:

Block Image

Here are two additional photos that may help, note how you can’t see any ‘clips’ on the side of the diplay assembly.

Block Image

Block Image

Anyway, I am pretty confused and don’t know what to do. If you need any additional info feel free to ask me. Worst comes to worst I hold my phone together with rubber bands and hope it lasts until March when I’ll get a new phone.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

The part that still remains on the phone is part of the LCD module. Due to it being a poor quality part they have become seperated so the LCD frame is left on the phone and you have just lifted the LCD itself.

You will be able to lift that frame off just as if you were removing the whole thing. Just get a thin tool underneath the plastic bezel and start lifting from the bottom and work your way up. The clips you highlighted are how the screen is held on so this is completely normal and should come away with some light prying. And also please make sure the 2 pentalobe screws at the bottom of the phone (either side of the charging port) are removed.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

aadam さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 34