評価: 25
3
I'm in the midst of reassembling my 3GS after replacing a cracked housing, and the volume and mute buttons don't seem to be protruding far enough after putting that assembly in.
I've tried and retried 10 times, with the same results each time. They both sit almost flush.
So I'm wondering - is this normal? Do they get pushed out to the correct depth after everything else is in the phone and is pushing on them?
この質問は役に立ちましたか？
評価: 25
3
I ended up answering my own question through testing. The answer is no.
I popped the bezel and assembly back into the old housing to see, and the buttons functioned perfectly.
So if any of you end up here with the same problem, it's because the unofficial housing is off spec.
このアンサーは役に立ちましたか？
評価: 307
3
1
The after market casings will work. You just have to shim up the Mute, Volume, & Power buttons. Black electrical tape works great.
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 3
過去 30 日: 3
今までの合計 830
1件のコメント
Try a small file to make the opening bigger
pollytintop さんによる