メインコンテンツにスキップ

2013年11月22日に発売されたMicrosoftの第三世代のXbox ゲームコンソールです。

727回答 すべてを表示

XB1 E100 code during startup

Block Image

I am continuously getting this same error code. Anyone have an idea if it's fixable?

I've tried the restart, reset without deleting saves, and even factory reset, also the flash drive offline update so at this point I'll try ANYTHING. Please help?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

1 件の回答

I don’t have an xbox myself, but I found an old post on this website with the same issue, the comment that fixed it talked about doing a reset, but since you tried that, there is another comment with a suggestion below, I would give that a try.

“If you are still having this issue I just fixed mine. I removed the hdd from the xbox and hooked it up to my pc. Accessed the system update 1 partition and deleted all the files and reinstalled the hdd. Then took a flash drive (any drive over 8gb will work) and formatted that to NTFS and extracted OSU1 to it and inserted it into the USB port on the xbox. Booting the xbox by holding for 15 seconds, the bind button on the side and the eject button and pressing the power button. The console then fully went through with the system update. Afterwards i just had to redo the initial setup but all my games and saves were still there. Hope this helps someone else. “

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

donaldrb1989 さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 1,303