メインコンテンツにスキップ

Microsoftのゲーム用コンソールのアクセサリです。壊れたゲームコンソールのアクセサリは、適切なツールを使えば簡単に修理できます。

131回答 すべてを表示

Xbox one Elite 2 controller missing components near right joystick

Hello,

I’ve got a problem with an Xbox Elite 2 Controller. I replaced the right joystick and it works fine except that it does not register a button press of the right joystick.

In the process I may have knocked off two components right next to it:

Block Image

Any help with identifying the missing components and what to replace them with is much appreciated.

Update:

I really want to know, so I got my hands on another one of these that needs fixing for a good price. This is what the components look like:

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

3件の回答

最も参考になった回答

If anyone cares, I managed to fix it. The lower component is a 32 ohm resistor. I just searched old junk PCBs and took one that fits. The upper component is a diode and this one is not critical.

Also there was a broken trace, so I soldered a jumper wire from the button switch to the 32 ohm resistor and everything was working ok then. I skipped replacing the diode because it’s too much trouble in that awkward spot with the broken trace. No clue what the diode is there for.

Desoldering that joystick module was a PITA because the PCB somehow eats up a lot of heat. Much more annoying to work on than the previous controllers! Now all is good :-)

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

Probably the same as the capacitor next to it. usually when a component forks off in two directions like that the caps are identical.

このアンサーは役に立ちましたか?

スコア 0

2 件のコメント:

Hi there, thanks! I uploaded another picture with the two components on the board. The component looks different than the cap. Could it be a resistor? The one above it is a small black box, a bit taller than the cap. It's connected by two traces. Could it be a diode maybe?

さんによる

i cant really tell what it is in the second photo, to blurry. It kinda looks like a switch,

さんによる

コメントを追加

Hey Chris,

Thank you for posting this! Because of you I was able to fix a elite 2 controller I bought for a good price to fix. I had given up because there were some components missing but because you found out it wasn't a necessary component I just put in New sticks and tried it and voila it works again. Now I need a new battery because the one that is in there is swollen. Anyways thanks for all your hard work it has really helped me with my controller :)

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Chris さん、ありがとうございました!
統計データ:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 7

今までの合計 313