修理を始めるには コミュニティ ストア

モデル番号はA1238/80、120、160GBハードドライブ/ブラックもしくはシルバーメタルフロント

904回答 すべてを表示

オプション

No audio from earphones

iPod 5th gen 30GB and iPod 6th gen 120GB.


5th gen - I used to get sound out of one earphone and now I don’t get any, not even any static when inserting and removing jack - everything else appears to work fine.

6th gen is almost the same as it comes through one earphone but if I half remove the jack it comes through both earphones.

Does anyone have any ideas what issue is on either model and possible fix?


After reading similar issues on the forum, I don’t know how to play from 30 pin and pressing on the bottom right doesn’t affect sound. I have tried 2 sets of earphones and a pair of headphones with no success.


I am particularly interested in how it can play from one earphone but not the other.

Thanks

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順

オプション

It sounds like it needs a new headphone jack/hold switch. It's not that hard to replace. There are a few videos on YouTube one how to replace it and you should pay attention on how to open the case. You can buy all of the parts for ipod classics including the iflash which replaces the harddrive with a sd card idemigods.com has all of the hard ti find parts.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

2 件のコメント:

I assumed it could be and bought a new headphone jack. This has been installed but sound still coming out of one ear. Headphones are working perfectly in another device.

My mind is blown what it could be.

さんによる

I would try another headphone set. I have seen the plugs that don't go all the way in.

さんによる

コメントを追加

回答を追加する

Antony Wilkinson さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 6

今までの合計 54