メインコンテンツにスキップ

This Flip phone was carried by Verizon and made by LG. It runs on CDMA technology with dual band frequency.

7回答 すべてを表示

Can I take the motherboard out of one phone and put in another?

I have a lg vz8300 verizon flip phone. I think the earpiece has gone bad because I can’t hear when someone calls me. I bought a new lg vz8300 but verizon won’t activate this phone anymore. Can I take the motherboard out of my old phone and put it in my new phone. Then it wouldn’t have to be activated.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1
2 件のコメント

I have a good mother board but my phone is cracked. Will I lose information if I put good mother board in a new phone. Will I lose all info???

さんによる

@eazy1313

The information is on the motherboard but do a backup anyway to the cloud or a PC if you can, just in case.

If you have a backup, then most likely you won't need it, if you don't have one, then most likely you will. Murphy's Law

さんによる

コメントを追加

2件の回答

最も参考になった回答

Hi,

Where is the “can’t hear problem” located, in the earpiece receiver or in the motherboard?

If it is the receiver it may be easier to swap the receiver but you can swap the motherboard if the two phones are the exact same model.

If it is in the motherboard then it makes no difference. It won’t work in either phone as the network details are stored in the motherboard of the “faulty” phone.

このアンサーは役に立ちましたか?

スコア 2

2 件のコメント:

I don't no where the problem is, all I know is when someone calls me I can't hear them. they can hear me. I have to put my loudspeaker on to talk to them

So, it might be the receiver.

さんによる

Hi @barbee ,

If you can't test or swap the receiver, since it is connected to the display board and not directly to the motherboard, if you swap motherboards then as long as the receiver in the new board works and the problem is in the old receiver and not the old motherboard then it should work.

Click on the device icon at the top right of the page to get to the screen housing replacement guide which shows how to open the phone so that the motherboard can be accessed and replaced.

Good luck

Cheers

さんによる

コメントを追加

Just change the sim card. It should work. I have had phones that they said they couldn't connect and I took the sim card out of a working phone and put it in and try it. If not I don't see why you shouldn't be able to change the board if it's the same model of phone

このアンサーは役に立ちましたか?

スコア 0

4 件のコメント:

Hi @barriphone ,

Don't know about a VZ8300 as I can't find any info on that model but a VX8300 is a CDMA phone which has no SIM card

Cheers.

さんによる

@jayeff if the phone wasn't a CDMA phone before you can't change the board. It won't work on the CDMA network if it's a GSM phone

さんによる

There is no SIMS card

さんによる

You’re right I put the wrong letter It’s the VX8300 @jayeff

さんによる

コメントを追加

回答を追加する

Barbara Evridge さん、ありがとうございました!
統計データ:

過去 24時間: 1

過去 7 日: 7

過去 30 日: 23

今までの合計 1,505