メインコンテンツにスキップ

2016年9月16日に発売。モデル番号は1660, 1778で GSM かCDMA があり。/ 32、128、 256 GB / 色はローズゴールド、ゴールド、シルバー、ブラック、ジェットブラック

2264回答 すべてを表示

Screen reflector problem after sanitizer went inside of iPhone

I was trying to disinfect my iphone with sanitizer i was confident that phone is water resistant and it will not harm my phone but sanitizer managed to get into the display assembly and whole display went blue but after few days display is fine but i have few bright spots like pressure marks and i think its due to impurity managed to get into the backlight reflector in display so cleaning backlight assembly and cleaning reflector will solve this problem or not iam not sure i need guidance please help …

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

2件の回答

I doubt you can clean it. You can replace the screen for about 20 to 30 dollars for a high quality screen if you change it yourself. If you change it make sure to watch a few repair videos on YouTube and make sure you disconnect the battery before you take the screen off or you could short cut the backlight circuit or damage something else. And the phone is supposed to be water resistant but the phone may have been opened before and not resealed. You could also have a crack on the screen. I always put the cleaner on the rag and then wipe the screen. You can purchase a new screen from ifixit and if it's out of stock I also use fixez.com for my parts. I hope this information helps.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

Maybe your iPhone has been repaired and as you know after repair of any apple devices the waterproof guard is not working anymore. It happens because of the hermetic substrate which is deteriorated after a service. I'm saying it because I have an Iphone 8 plus and I disinfect it with arcreef sanitizer and I don't have any problems, it is working perfectly.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

gauravdhami60 さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 6

今までの合計 1,104