修理を始めるには コミュニティ ストア

Device repair and information for the Vizio D-series 50" LED television with model number D50n-E1.

77回答 すべてを表示

オプション

Vizio 55" D Series TV Right side of screen has noise and distortion

When TV is reset it turns on, shows the Vizio signal, then will display the normal content on the left side (picture shows black in this area). One day the right half suddenly showed noise and distortion as show in the picture. This is a 55" 4K D Series TV. After a reasonably short amount of time, the TV turns off. Then when powered up again, the power indicator comes on (bottom left) then fades out and no image is shown at anytime on the screen. Will stay this way until unplugged for a short amount of time.

Model is D55U-D1

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
1件のコメント

Where can I get replacement PCBAs?

さんによる

コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

@rookieman could be a T-Con board or LVDS cable issue. Most commonly this is caused by a failed LCD driver board which is part of the panel due to its bonding of the cables to the panel. I would at least try a different t-con board just to rule it out.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2
コメントを追加

オプション

T-Con board did not solve the problem. However, replaced main video board (not panel), problem solved.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

1件のコメント:

When you say main video board do you mean the one where all of the HDMI ports go in? I have the same issue T-Con didnt fixit. your the only persion I found that had the same problem.

さんによる

コメントを追加

回答を追加する

Dale さん、ありがとうございました！
統計データ:

過去 24時間: 4

過去 7 日: 18

過去 30 日: 60

今までの合計 2,244