メインコンテンツにスキップ

Model A1174 with 2 GHz Core Duo or Model A1207 with 2.16 or 2.33 GHz Core 2 Duo

209回答 すべてを表示

USB/Ethernet/all ports not working

The USB/Ethernet/all other ports on the back of my iMac have stopped working. I plugged a USB cable in and it touched a lamp with a short--it arced and now the USB and Ethernet don't work. The computer boots seems to work fine, but I can't interact with it via keyboard/mouse/ethernet. The airport is off so I can't try connecting via wifi.

My guess is the bus with the ports has been fried. Is this on the logic board, or is it a separate board that's easier to replace?

In addition, any ideas on how to connect/interact with the computer without the use of USB/Ethernet/Wifi?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

2件の回答

選択されたソリューション

You're probably looking at having to replace the logic board. You may be able to get to the bluetooth by disconnecting your keyboard and starting up.

このアンサーは役に立ちましたか?

スコア 1
コメントを追加
最も参考になった回答

if you have a bluetooth module, you can try using a bluetooth mouse and keyboard. your imac should ask you pair a keyboard and mouse if you have the bluetooth installed.

as for the damage, the ports are part of the logic board. i have never seen the come seperate. i would have to say

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

Reed さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 923