Dishwasher not starting. All lights working.
I have a Whirlpool Quiet Partner II. Yesterday, I noticed that while other buttons were working (i.e. the cancel button), the start button would not work when pressed.
I have reset the control panel by pressing sani-rinse, heated dry, sani-rise.
- When I do so, the start button lights up with all the other buttons.
- I then close the door, and Start/Resume turns on. The dishwasher makes a loud sound on the normal cycle, washing status, then it hums, makes a sound like it is draining
- It then goes to the rinse only cycle and washing status, and continues to hum/drain
- Finally, all the lights turn back on
When this is over, I still cannot get the start button to work.
Any thoughts are appreciated.