Skip to main content

iPhoneの第4代目で、修理はそのままパーツを直接交換するだけです。しかし、正面ガラスとLCDはセットで交換する必要があります。容量はGSM / 8,、16m32 GB / モデル番号 A1332 /本体カラーは黒と白色

3283の回答 すべてを表示

Screen won't turn on after taking apart for a power button DIY

Hello all,

My power button was stuck so I decided to do a DIY, ordered all the tools and the button as needed. After assembly of the phone, it powers up, connects to itunes and computer, but the screen won't show up, only back-light... swiping or touching the screen doesn't do anything.

I double checked all the connections, I have NO screws left over, that means i've put everything back the proper way.

The only hick-up I've had was taking out the two screws that hold the power button assy. The digitizer and I'm assuming LCD cables were in the way, so I pushed them back as far as they could without snapping them, that didn't help so I had to take the rest of the phone apart just to get to that one screw.

After putting everything back together, the digitizer cable got stuck, so I had to reassemble, clear it and put everything back together. Nothing seems broken or torn, just slightly stretched I guess. I don't know what else could be wrong.

I hope I don't have to order a whole new screen (150$) because of that stupid digitizer cable that got stuck and because I had to replace that 5$ power button. Probably will never try to fix another iphone...

Any input on fixing this would be appreciated!

P.S.: it seems that I'm not the only one with such problem:

Screen won't turn on but iTunes recognizes the phone

Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment

Android 修理キット



Android 修理キット




Most Helpful Answer

A new screen will run you less than a third of what you yourself quoted. It sounds evident that you damaged the screen and digitizer cables. If there is no damage to these connectors on the logic board, I would go ahead and buy a new one and hope for the best.

Was this answer helpful?

Score 1
Add a comment

I think he's quoting the prices from here:

iPhone 4 (CDMA/Verizon) Screen [same for AT&T version]

I'm in the UK so I go here:

23.99GBP! [same for black, can be found on link above]

I'd suggest shopping around as Cody says, you *should* be able to get one for less, just ensure you get the digitiser and screen together as gluing them together is a real pain in the arse but still more fun than trying to separate the old assembly!

iPhone 4 (CDMA/Verizon) Screen画像


iPhone 4 (CDMA/Verizon) Screen


Was this answer helpful?

Score 0


heh, just noticed how old the question is ~_~


Add a comment

Add your answer

maxidrom2002 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 4,378