修理を始めるには コミュニティ ストア

PS3スリムは、オリジナルの型番CECH-2000を持つPS3ビデオゲーム機のセカンドバージョンである。ソニー・コンピュータエンタテインメントによって製造され、初代プレイステーション3の多くの問題を修正した。2009年9月1日に発売された。

465回答 すべてを表示

オプション

ps3 slim freezing and artifacting problem

I can start my system just fine but the problem first starts after a hour or two of gaming, my ps3 completly freezes(audio and video stop). Then when I restart the system I will get blue and sometimes green arfitacted screens. I have to unplug it and wait an hour or more for it to work again. I have already done a complete system restore and hdd format so I can tell my problem is not software related but I do not know the hardware problem. I had my ps3 over a year now and the warrenty is gone, so I'll try anything to fix it.

ps3 slim 120g model 2001a

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

3件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

Sounds like an overheaeting problem. I would open it up and clean it out, make sure that air vents are not obstructed or occluded by dust/debris. Make sure that you also clean your power supply and provide for adequate circulation. Check that the fan is working right and clean it as well. Use these guides to help you with it. Once you get it accomplished, reevaluate and let us know how it is going. Good Luck

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

2 件のコメント:

Well I opened my ps3 and cleaned it but there was barely any dust. Power supply was clean and the fan works. So I plugged it in and turned it on and got to the xbm but that only lasted a minute before it froze again artifacting the screen. Then I tried turning it on again without the hard drive and got the cannot start screen which then immediately froze and artifacted. So after this testing I believe we cross out any power and hdd problem with my ps3. If anyone has anymore ideas please let me know and thank you for the help.

さんによる

Have you checked on the heatsink on your processor yet? Make sure it is properly seated and makes contact with. Also do check on the power supply issue. I seem to remember that there were some issues with it that caused similar problems. Check on youtube....

さんによる

コメントを追加

オプション

Cause: GPU overheating.

Solution: Apply new thermal paste on the GPU.

Good luck!

-Casper

このアンサーは役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

オプション

maybe the GPU is damaged get new motherboard perhaps as I did all pf that cleaning and repaisting even re-thermal padding myself and it still artifacts

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

回答を追加する

matttooman さん、ありがとうございました！
統計データ:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 18

今までの合計 6,011