メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

Televisions made by the Chinese multinational electronics company, TCL.

59の回答 すべてを表示

TCL No Backlight, Black Screen, Flashlight Test Good, Menu Sounds Good

I have a 55” TCL Roku TV (55S405TNAA) that was working fine, then the next time it was turned on has no picture. Clicks are audible when adjusting the volume or navigating the menu. Flashlight test does show the menu.

Is this most likely a panel issue or an LED strip issue? If one LED strip goes out does it deactive the rest?

I feel confident and comfortable that I could replace any of the panels.

I do not feel so comfortable about replacing the LED strips after watching a youtube video…hoping its not that.

Thanks!

Block Image

Block Image

Block Image

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0

コメント:

Was this issue resolved? What was the outcome?

さんによる

I have the same issue 55s401, no voltage at the LED out put, connected and disconnected. I have my 12v on the main board connector. Going to order a new one out of a damaged set to try. 1 year and almost a month old TCL wouldn't give me the time of day. Go figure. Any one find out anything please email me. bgt109@gmail.com thank you.

さんによる

We have the same problem with a 14 month old 55 401 again TCL could not care less about our issue!

さんによる

コメントを追加

Nintendo Switch Kits

A quick fix to get back in the game

Shop Switch Kits

Nintendo Switch Kits

A quick fix to get back in the game

Shop Switch Kits

2件の回答

最も参考になった回答

I am repair tech. From the troubleshooting you have strong chance you have LEDs bad. This model is easier than most to change LEDs. There is 2 version of LED strips. You will need to use numbers on the strips and/or LCD panel number to get correct parts. Do not order by model number alone. Good luck

この回答は役に立ちましたか?

スコア 2

コメント:

I have a tcl 55 s405 made in march 2018 with same problems. I ordered the total repair kit with all three boards from shop jimmy and that didn't work so now I'm sure it is bad led strip. Hate to spend much more money on it. Did not last 2 years. It appears tcl leds don't last . I won't buy another tcl.

さんによる

コメントを追加

@kzoomarine check your power board first. Test the LED output connector with a voltmeter and let us know what you get. It could be the power board. If it checks out ok…….well I am not going to say it but you know what it most likely will be.

この回答は役に立ちましたか?

スコア 1

コメント:

Ok, so I plugged in and turned on the TV, put the multi-meter to each pin (they’re not labeled), and got 0.0 volts for each one. Turned the TV off and unplugged it, unplugged the LED output connector, turned the plugged the TV back in and turned it on, then again put the multi-meter to each pin…again 0.0.

So it looks like I lucked out and it should just need a new power board, right? Other parts of the board did have 12v and 40ish volts. Is that normal for just the LED connector to go out?

さんによる

Ordered a new power board, but have the same effects. Not sure what that indicates. Added images to the original post.

さんによる

@kzoomarine post an image of your complete power board or if you can give us the power board number.

さんによる

Images of the full board and board number added to the original post. Same voltage results when the led connector is plugged in as when its unplugged (shown in the image).

さんによる

Ken, did you figure it out? I have the same tv and same issue. Thanks

さんによる

5件以上のコメントを表示

コメントを追加

回答を追加する

Ken Scott さん、ありがとうございました!
統計データを表示:

過去 24時間: 79

過去 7 日: 450

過去 30 日: 1,932

今までの合計 5,713