メインコンテンツにスキップ

より早い処理スピードを可能にしたiPhone 3Gのアップグレード版です。このデバイスの修理は3Gと似ており、標準のドライバーと開口ツールが必要です。モデル番号 A1303 / 16 もしくは 32 GBの容量 / ブラックもしくはプラスチックの背面ケース

1500回答 すべてを表示
締切られた回答

Replaced iPhone 3GS digital display but still have white screen

I dropped my Iphone 3GS on the floor and the display shows a white screen. Nothing appeared wrong with the display, no cracks, etc. I replaced with a new Iphone 3GS display assembly but still shows a white screen. Is the logic board the problem?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0

1件のコメント:

Try a Reset, hold both Home and Power buttons until iPhone restarts on its own.

さんによる

コメントを追加

2件の回答

Pull it apart again and make sure all connectors are tight and all the way clicked in. More often then not, they get loose when you put it back together.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

This is usually a sign of a bad lcd (the screen under the glass). If you do replace it, be very gentle with the front of the screen as the liquid contained inside will hold finger pressure and it will be noticeable when re-assembled

このアンサーは役に立ちましたか?

スコア 0
コメントを追加
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 874