メインコンテンツにスキップ

Repair and disassembly guides for Kenmore Microwaves.

182回答 すべてを表示

Microwave shuts off intermittently, already replaced door switch assem

I have a model 401.80082700 serial 725MM00044. Intermittent problem. Microwave goes through heating cycle and then totally powers off…no display, no light, no power. After 15-30 seconds the display comes on and instructs to press clock and reset time of day. After doing so the microwave is fully functional and may operate several times before powering off again. Occasionally the display appears fainter than normal, esp the center of display. I have replaced the door switch assembly but after several days the intermittent problem has returned. What do you think? TY

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 3
1件のコメント

After much delay and frustration I ordered and replaced the control board…..works great…..thanks for your recommendation!

さんによる

コメントを追加

2件の回答

ベストアンサー

Sounds like the problem is the control board, not the door assembly. Try replacing the main controller circuit.

Good luck!

このアンサーは役に立ちましたか?

スコア 1

1件のコメント:

I have the same problem with my Kenmore microwave. Is this the part I need? https://www.searspartsdirect.com/product...

さんによる

コメントを追加
最も参考になった回答

There are two parts to that door switch, here they are on your model along with how to test them:

https://www.repairclinic.com/RepairHelp/...

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

回答を追加する

Ken Thome さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 9

今までの合計 1,034