評価: 23
1
My Epson 1430W is making a werid problem. I had a failure with my printhead and motherboard, I replaced both. The problem was that it was not recognizing the cartridges. But after the replace of those parts is still giving me the failure.
It recognizes when I put 1 by 1 of the cartridges, but on the 6th it gives me the error. I checked the fuse F1 and its good. The board and the printhead are brand new
この質問は役に立ちましたか？
評価: 8.2千
24
12
8
I fixed my non-functional Epson printer with this procedure….
https://epson.com/support/updating-your-...
This may or may not correct the problem you are seeing.
このアンサーは役に立ちましたか？
Did not help me still same problem
評価: 43
3
there is a fuse on the main board fuse no.2 it is broken replace it and the issue will be solved.
it is caused by incorrect manual head cleaning.
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 0
過去 30 日: 4
今までの合計 222
3 件のコメント
It does not allow me to do the update, it sends me an error. Any thoughts?
aemleal さんによる
If you can post the error message it will be helpful. On printer display or computer etc.
tcagle53 さんによる
I am having the same problem . I have exhausted everything I know. looking for any ideals
ken さんによる