メインコンテンツにスキップ

2016年9月16日に発売。モデル番号は1660, 1778で GSM かCDMA があり。/ 32、128、 256 GB / 色はローズゴールド、ゴールド、シルバー、ブラック、ジェットブラック

2266回答 すべてを表示

After screen replacement LCD flickers black?

On an iPhone 7. So the screen replacement went well, and only a swap from one unit to another. However this weird flickering started shortly after. The thing is it only occurs when receiving/sending a text, or when initially turning on the phone(when the phone first searches for service). Or when a sim card is first inserted, and goes away a few seconds after service found or text sent/recieved.

It reminds me of older phones when near computer speakers, you send a text and the speakers make a weird beeping interference sound. Except it's affecting itself instead of the stuff around it.

I've tried a dfu restore, reseating the connectors, I've checked to ensure every screw is tightened down properly, tried a new battery and this screen was working perfectly fine on the other unit.

Any ideas at this point would be helpful!

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

2件の回答

ベストアンサー

There is alot of talk of different iphone 7 having different manufacturers screens. I've never had any issues with screens that I use but it's worth a thought. I would replace the screen.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

I would check the connections on the board if this issue was not happening on the other unit. You can disconnect the battery and clean the connections with a toothbrush and isopropyl alcohol. I’ve also experienced issues right after a screen replacement where the display will flicker or have bars across it and they will actually disappear after about 24 hours in most cases.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Keetan Brumm さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 6

今までの合計 113