評価: 35
2
1
so about 2 days ago i dusted off my ps3 to tinker with it a bit because i was bored so i pulled it apart and one thing led to another and now i have found myself with a ps3 motherboard with a burnt inductor , i know this is asking a lot but could anyone identify the part in the photo provided below so i can order a replacement?
any help would be appreciated!!
the part in question is the one with 3R9 written on top of it
この質問は役に立ちましたか？
評価: 782.3千
1.1千
893
2.3千
@matfrags that is a 3.9µH inductor. available at digikey.com or mouser.com as well as many others. The cost of the part will be no more than a few $ and will be easily replaceable for anyone with some soldering experience.
I prefer to repair things instead of replacing. After all, we are trying to reduce ewaste by repairing not replacing
このアンサーは役に立ちましたか？
評価: 26.4千
113
52
62
Do you have experience with microsoldering? If not, you may have just earned yourself a new motherboard. Replacing that part requires microsoldering which is obviously not for beginners by any means. You may be better off getting a new motherboard with a paired optical drive.
https://www.fasttech.ca/playstation-3-pa...
You will need to transfer the heatsink and re-apply thermal paste.
[リンクされた製品が存在しない、もしくは無効: IF179-010]
このアンサーは役に立ちましたか？
I personally don't but my father does and he said he can do it as long as I can find the part
And I don't really think spending 170 dollars on a PS3 mobo would be worth it
過去 24時間: 0
過去 7 日: 0
過去 30 日: 5
今までの合計 418
