修理を始めるには コミュニティ ストア

AppleのiPad AirのWiFiモデルのバージョンはモデル番号A1474、スペースグレーと、シルバーがあり、カスタムA7プロセッサーが装備されており、容量は16、32、64、128GBがあります。

299回答 すべてを表示

オプション

Cannot get antennas to snap into place

I'm doing a battery replacement, everything went perfectly, really easy job, until... it came time to put the antennas back in place. I cannot seem to get them to snap in place, having done work on iPhones before I know they can be fiddley cause they are so small but an hour later and a sore neck and I am no closer to getting these antennas to snap back in. Anyone have any tips, is there a particular knack to these?

Update (07/13/2018)

Pic of the Board

Block Image

Pic of right antenna

Block Image

Pic of left antenna

Block Image

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

Unfortunately, the connectors on the logic bard are physically damaged. You could try to cut off the portion that is no longer circular but that will require some very fine tip cutters. Perhaps with some fine tweezers you could manage to "break" them in the right spot by bending them back and forth.

However, the best solution is to have new connectors micro-soldered on the logic board. This is not a DIY repair unless you have experience micro-soldering with hot air stations.

このアンサーは役に立ちましたか？

はい いいえ
スコア 3

1件のコメント:

Aww man that is annoying, thanks for the info though. I have a guy who does soldering for me, so I'll let him handle it thanks.

さんによる

コメントを追加

オプション

i use my bent nose tweezers to hold the clip at its "neck," then use a torque 6 driver to push straight down on the head. They shouldn't be too fiddly though. there may be damage to the connector or the clip itself. so if you can upload a magnified picture of the two, i can help inspect it.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

2 件のコメント:

Hey Scott, thanks for your quick response, have updated with some pics would be great if you could take a look, thanks!

さんによる

not a problem. i see my request for pictures allowed another to finalize the answer for you. :) sorry for the outcome though. those are some pretty simple components to swap out. (in the scale of SMT components that is) easy to swap out of another board if you have one, or cheap to buy if you dont.

さんによる

コメントを追加

回答を追加する

Mary Ellen さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 6

今までの合計 62