メインコンテンツにスキップ

スピーカーとスピーカーコンポーネントを含む、サウンド生成するデバイスの修理ガイド

2703回答 すべてを表示

Why does my subwoofer start to make a rumbling sound at high volumes

I have a cowin ark 4.1 speaker and have been using it for little over a year now. it was working perfectly but i have recently started to hear the subwoofer rattle at high volumes ? any idea on how to fix this? i have emailed cowin 3 times and they never responded

thank you

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

2件の回答

ベストアンサー

It sounds like a small tear in the speaker cone. It will be visible. Remove the cover to inspect. If it is a small tear, you can probably repair it with rubber cement. If larger, you will need to replace the cone.

Good luck,

Russ

このアンサーは役に立ちましたか?

スコア 1
コメントを追加
最も参考になった回答

Typically rattles at higher volume are indications of a problem with the cone not moving properly. This can be a tear in the cone, a rip in the surround or a problem with the spider. The surround is the foam piece around the edge. The spider is the part near the magnet that holds the cone in place. If the cone does not move up and down properly, it will hit the side and cause a rattle. The bottom line here is that the actual speaker requires attention.

Dan

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

回答を追加する

arkt0m さん、ありがとうございました!
統計データ:

過去 24時間: 1

過去 7 日: 13

過去 30 日: 62

今までの合計 9,094