メインコンテンツにスキップ

Guides for the Wi-Fi version of the iPad Mini 2. Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

169の回答 すべて表示

lcd comes on but no touch works

replaced the lcd and glass, customer brought it back with ghost touching and also after time the ipad wouldnt react when touching the screen. placed kapton tape on the glass and still the same issue. i have tried sliding the screen by just touching the lcd but no luck, does it need a new lcd? or will the lcd not react anyways when touching?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1

コメント:

the touch only works if you touch the glass. The LCD is just that, an LCD to view images.

As the companion says, the problem is in the tactile crystal. Sometime I happen that after changing the screen, the touch stops working a while later. Phantom touch seconds the motion, bad touch screen.

による

コメントを追加

1回答

最も参考になった回答

This sounds like more of an issue with the digitizer glass/assembly. I'd recommend looking into reseating the cables for the digitizer and making sure no debris are in between the digitizer and the LCD. If not, you might need to look into a new digitizer. Good luck!

iPad mini 1/2 Screen Digitizer画像

製品

iPad mini 1/2 Screen Digitizer

$54.99

この回答は役に立ちましたか?

スコア 2
コメントを追加

回答を追加する

Nathan さん、ありがとうございました!
統計データを表示:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 4

今までの合計 89