修理を始めるには コミュニティ ストア

Sony Xperia Z3 発売日：2014年9月（グローバルモデル） 日本国内取り扱いキャリア docomo（SO-01G）・・・2014年10月23日発売 au（SOL26）・・・2014年10月23日発売 Softbank（401SO）・・・2014年11月21日発売

114回答 すべてを表示

オプション

Why does (only) the lower part of my touch screen not respond?

When I bought this phone second hand, the very low part of the touch screen would not repond, which did not bother me too much. At this at the point the screen had already been replaced one. Then i dropped it and needed another screen replacement. Ive tried three screens now, the first did not work at all, second would only lighten up if i loosened te screen from the frame. now the third shows the full screen, but only reponds to touch in the upper part. Am I just very unlucky with the screens they deliver or is there something wrong with all the screen I ordered? thanks for your help

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
1件のコメント

Same thing with. Lower part of touch Screen is not working.

さんによる

コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

Hey Albert, in my experience the Sony Xperia needs to be repaired by a proffesional. The xperia is not as easy as iT Seems.

Parts kan be detective to ofcourse. Double check al your connections and if possible talk to your supplier.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

オプション

I regularly order aftermarket Sony screens, the only stock available in the US. I also order OEM Sony screens from a Sony authorized vendor in Europe. The Sony OEM often costs 5 times as much, so my customers rarely choose this option, despite my encouragement to go OEM.

The aftermarket screen out there really are not great quality. Defective digitizers are highly common. Glass quality is often poor too. Asahi Dragontrail Glass (a Gorilla Glass alternative) is only found on the OEM parts. Aftermaket is usually cheap tempered glass.

I have never seen a defective Sony Service Pack screen.

Regardless of which part you use, I recommend a professional familiar with Sony. Sony is basically the last brand learned by most repair texh in the US, so few even know what they are doing.

Definitely go to a place that can inspect your motherboard under a microscope first. It is entirely possible that the digtitzer connector on the motherboard is damaged due to the repeated mashing efforts of someone.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

回答を追加する

Albert さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 2

今までの合計 624