メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

Samsungプリンター用の修理ならびに解体ガイド。

83の回答 すべてを表示

Why is the paper coming out all black?

Every time I print now, the paper comes out half black so that I can't read the doc. Was working fine until now but very frustrating. I am wondering if the machine can be fixed or do I need to replace it?

Thanks

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 1

コメント:

Hi Sir

My Samsung Printer when printing its good, but when i take copy the page is fully black , whats the reason ?

さんによる

Hi @ Nived Raj,

It appears as though the scanner unit may be faulty.

Copying is the same as scanning, it uses the same hardware.

When copying the "scanned" image is printed straight after the scanning process is finished whilst when scanning, the scanned image is stored in the printer memory so that it can be retrieved later to either send as email, to file etc.

Can you hear (see?) the scanner bar or light moving across the scanner glass?

If your printer has an ADF does it work when copying or scanning?

What is the model number of your printer?

さんによる

Printer Model SAMSUNG SCX-3405F, and now the copying and scanning not working, only printing

さんによる

コメントを追加

3件の回答

選択されたソリューション

Hi @Nived Raj,

Here'a link to the relevant page in the service manual which outlines the possible causes of your problem.

Hopefully this is of some help

この回答は役に立ちましたか?

スコア 3
コメントを追加

Have you tried another toner cartridge? Black print can be caused by several things such as a defective or leaky toner cartridge, paper scraps stuck in the imaging or fusing rollers.

この回答は役に立ちましたか?

スコア 0

コメント:

Yeah agree with DrGlowire. You should check printouts quality - with another toner-cartridge. Mostly - there are problems with them.

さんによる

コメントを追加

You can also try this especially for HP, Samsung brands:

Step by step solution..

 ++++

Try these easy fixes for better quality laser printing. If your issues persist, the problem is more likely to be due to supplies or hardware.

  • Check your print driver to make sure you have the correct paper or media selected.
  • Double check that the paper loaded in the tray matches the type selected in the printer driver.
  • In some laser printers, the fuser has an adjustment for paper type. If your printer’s fuser can be adjusted manually, check to see that it’s set properly but be aware: fusers get very hot so exercise caution.
  • Check out your toner cartridges, imaging unit(s) and the fuser for damage. These components vary by model and manufacturer so it’s best to refer to the User Guide.
  • If you’ve got smudge marks, print several blank sheets of paper and they will eventually fade away

この回答は役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Haim Nusboim さん、ありがとうございました!
統計データを表示:

過去 24時間: 16

過去 7 日: 83

過去 30 日: 274

今までの合計 5,462