メインコンテンツにスキップ
リペアコミュニティに参加 - アカウントの作成

2016年9月16日に発売。モデル番号は1778,1784。 GSM かCDMAの32、128、256GBがあり、色はローズゴールド、ゴールド、シルバー、ブラック、ジェットブラックがあり。

3d touch and touch id not working..

The touchscreen i.e. 2d touch of my phone works fine but the 3d touch isn’t responding...?

I tried reseting the phone but it just avoids to work..

Even the Touch ID is not working even though the home button works just fine but the finger print isn’t sensed......

I had a screen replacement once.

I would be nice if you help me in finding the problem with it...

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

4件の回答

ベストアンサー

Hi,

Both the 3D Touch and home button run through the same cable, I would highly suggest trying another screen, as there may be damage in the cable. :-)

このアンサーは役に立ちましたか?

スコア 3

3 件のコメント:

Are you sure as I have problem only with my Touch ID but the home button still works.

さんによる

Yes, I am quite positive, try another screen and let me know, also make sure it’s not a poor copy screen

さんによる

Sure will do that..!

さんによる

コメントを追加

I had the same problem, and after i replaced it with the old screen it all worked and I found out that some how the little cable was broken:(

このアンサーは役に立ちましたか?

スコア 1

1件のコメント:

I e replaced 2 screens and still can’t get working properly

さんによる

コメントを追加

I have 3Dtouch, touchID and force touch not working after I opened My iphone7plus, maybe changing screen I can solve the problem ?

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

I’m pretty sure you have damage one of the flex cable ( the lower one) it’s very easy to . i have done it a few times:( So you you have to be very very very carefull when you open up your phone.

さんによる

コメントを追加

I have this problem too with my iPhone 8 Plus, the flex cable doesn’t even seem damaged at all.

このアンサーは役に立ちましたか?

スコア 0

3 件のコメント:

It is for sure damaged, change backlight and all will be right

さんによる

When I opened my 7 plus I couldn’t see broken flex till I put away backlight screen protection. If you opened your iPhone and from that moment Touch ID and home button doesn’t worked anymore, is for sure the damaged flex. Don’t change any other things, don’t’ change home button, just be very very very careful and change back light. By change only back light your screen will be good as usual. if you change all the screen with a preassebled as GIGA FIXXO ON AMAZON, it will be very easy and secure, but you will not have the original qualiti of apple screen

さんによる

Attention, flex Brocken is not the one you see near the home button!! The flex Brocken is under the protection of the screen. Don’t do it by yourself become is too risky, go to a Chinese or to a Irepair, and say that you want change backlight (15€ Part cost)

さんによる

コメントを追加

回答を追加する

Shivam Patil さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 20

今までの合計 3,361